Operation Pressure:Vacuum | Operational Method:Continuous |
Application Area:Heat Press, Plastic Electric Products, Wood, Glass | Main Parts:Ceramic Heating Tube & Quartz Heating |
Conveyor Length:8000mm | Conveyor Width:600mm |
Working Power:AC 380V 50Hz | Entrance Size:500mm |
Exit Size:500mm | Heating Chamber:4meter Heating Area |
Chamber:2chambers*2meter | Hight of The Entrance:120mm |
Temperature Adjustment:0-200 Centigrade | Belt Speed Adustment:0-20m/Min |
Constant Temperature:2c More or Less | Gross Weigth:1170kg |
Machine Size:(L)8100X(W)1050X(H)1260mm | Trademark:Eco |
Transport Package:Plywood Case | Specification:8000mm length, 600mm width |
Origin:China | HS Code:841939090 |
Introduction
The tunnel dryer does not have multiple heaters in the upper and lower sections of the tunnel body. A windshield is fixed on the front side of each skip to separate adjacent carts. The hot air passes vertically through the material layer and is reversed multiple times. The temperature of the hot air can be controlled in stages.
There is another type of through-flow drying equipment in which two tunnels are juxtaposed, and several drying sections are arranged along the longitudinal direction of the whole tunnel. An axial fan is installed in the upper part of each drying section of the two columns of tunnels, so that the hot air passes through the two columns in the section. At the same time, a material layer of the tunnel is input with a certain amount of outside air, and a certain amount of exhaust gas is discharged to perform partial exhaust gas recirculation.
Characteristics
Copyright © 2017 - 2023Spaghetti Straws Making Machine Manufacture All Rights Reserved